SPECIFICATIONS TnT®G4- Series

Mains Supply Test

•  Checks Polarity and continuity of mains supply by LED indicators
  (A-N, A-E, and N-E). (Flashing-        Test Fail indicator)

CLASS 1 Earthed Appliance

•  Appliance Check: Ensures appliance is plugged in and  turned on.
• Earth Bond Test: 200mA test current. Pass level Less than 1.0 Ω. Measurement: 0.01Ω to 10 Ω.
• Insulation Test: 500VDC / 250VDC. Pass level Greater than 1M Ω.

     Measurement: 0.1Ω to 10MΩ. *See also Leakage Test

CLASS 2 Double Insulated Appliance

• Appliance Check: Ensures appliance is plugged in and  turned on.
• Earth Bond Test: 200mA test current. Pass level Less than 1.0Ω. Measurement: 0.1Ω to 10Ω.

     Insulation Test: 500VDC / 250VDC. Pass level greater than 1MΩ. Measurement: 0.1Ω to 10MΩ. *See also Leakage Test

Extension Leads

• Earth Bond Test: 200mA test current. Pass level Less than 1Ω. Measurement: 0.01Ω to 10.0Ωs
• Insulation Test: 500VDC / 250VDC . Pass level Greater than 1MΩ. Measurement: 0.1Ω to 10.0MΩ.
• Continuity/Polarity Test: 250VAC check continuity and polarity of leads. Displays Pass/Fail.

Leakage Test *

• Leakage Current: 0 to 30.0mA at 200 to 265V
• Earth Leakage Test: 240VAC Mains. Pass level 1, 2.5, 5.0 mA leakage test levels with up to 10Amp load operation.

*TnT+XM model is capable of up to 20 Amp load

Note 1: Pass level for CLASS 1 is 5 mA

Pass level for CLASS 2 is 1 mA

Note 2: Leakage test may be performed if for any reason a standard CLASS 1 or CLASS 2 is not possible.

RCD Test

• Trip Current: 2 to 500mA in 1mA steps. User selectable.
• Trip Time: 0 to 3,000ms at .001sec resolution.
• Current Ramp Trip Test: 0 to 500mA in 1mA increments.

Power Measurement

• Leakage Current: 0 to 30.0mA at 200 to 265V
• Load Current: 0.0 to 10Amp (20Amp for TnT +XM)
• Voltage: 200 to 265VAC
• Power Factor: 0.00 to 1.00
• Apparent Power: 0 to 2400VA
• Power 0 to 2400W

Meter Mode®

• Load Current: 0.0 to 10Amp
• Voltage: 200 to 265VAC
• Apparent Power: 0 to 2400VA
• Power: 0 to 2400W